High Quality Brick Cutting Machine, Electric Brick Cutter, Brick Wall Cutter Machine Suppliers in China

Home > Products > Band saw > Vertical environmental band saw blade brick cutting machine

Vertical environmental band saw blade brick cutting machine

  • Vertical environmental band saw blade brick cutting machine
  • Vertical environmental band saw blade brick cutting machine
  • Vertical environmental band saw blade brick cutting machine
  • Vertical environmental band saw blade brick cutting machine

Vertical environmental band saw blade brick cutting machine

    Min. Order: 1 Others
    Transportation: Ocean
    Place of Origin: HeBei of China

Basic Info

Model No.: BF-50

Product Description

Product description

Upgraded version of the new environmentally friendly aerated block cutting machine, multi-functional Vertical Band Saw blade lightweight brick cutting machine with the ground wheel can be moved, the cutting speed is fast, the cutting is small, the dust is small, and any brick can be cut. The environmentally-friendly dust-free brick cutting machine adopts the front steel saw blade. The saw blade is thin and rigid. It is several times the speed of the ordinary brick cutting machine. The length of the saw blade is 3.9 meters and the cutting thickness can reach 500mm. It is easy to operate, light, dust-free, energy-saving and environmentally friendly.


Precautions

1. The grinding wheel of the brick cutting machine must be equipped with a protective cover. The use of silicon carbide grinding wheel for bricklaying must have a factory qualified certificate. During installation, check the grinding wheel for cracks or moisture and confirm that it is qualified before use.


2. Do not force the adjustment pedal to cause the cutting brick wheel to be overloaded; when the pressure is high, the grinding wheel is easily broken. When the brick is cut, the pedal cannot be overstressed.


3. When cutting bricks, the width of the cut portion shall not be less than 10mm. During the process of cutting bricks, the direction and position of the bricks shall not be changed to prevent the cracks from breaking the grinding wheel.


4. Cut brick operators should wear protective goggles, masks and gloves.


5. If the machine fails during the brick cutting process, the power should be cut off immediately, and it is strictly forbidden to repair the parts during mechanical operation.



Product Features

1. Thin saw blade, small sawing path, small dust

2. Large kerf and large cutting thickness

3. Rail type, easy to push and pull

4. With ground wheel, easy to move


Technical parameter


Model

BF-50

Dimension

1150*800*1800mm

Cutting size

600*500*500

Power

1.5KW

Weight

300kg

Maximum sawing depth

500mm

Electric Brick Cutter






Boron Machinery Manufacturing CO. LTD

 Hebei Borong Machinery Manufacturing Co., Ltd. is a specialized private joint-stock enterprise that produces and sells wire rolling machines, CNC steel bar bending machine, steel bar straightening machine, steel bar cutting machine, concrete conveying pump, reducer, and Other Machine tools. The company was founded in 1984. The company is located in Xingjiawan Town, Xingtai City, Hebei Province, which has a long history of mechanical manufacturing. It is close to Xingde Highway, 35 kilometers away from Xingtai City. Machinery manufacturing industry park, 10 kilometers away from Xingtai City, 10 minutes by car. The company occupies an area of 108,705 square meters, a building area of 30,099 square meters, has assets of 81.99 million yuan, and 358 employees, of which 39 are senior and intermediate management personnel and engineering and technical personnel. Under the jurisdiction of machinery manufacturing companies, precision casting companies and "Jiuhuan" brand high-end radiator company. The company is a member unit of China General Machinery Parts Association, China Construction Machinery Association and Fastener Association.

In the course of more than 20 years of development, the company has consistently adhered to the development strategy of science and technology, quality and brand development, highlighting brand building and independent intellectual property rights. Hebei University of Technology, Hebei University of Science and Technology and Other scientific research units and institutions of higher learning are joint collaboration units. Borong Cold Extrusion Molding Equipment Research Institute is a product research and development institution jointly established by the company and Hebei University of Technology. It aims to improve product development capabilities, upgrade product grades, and gradually form a technological innovation system that combines production, learning and research. Fully automatic thread rolling machine has been developed and applied for four patents. At present, this model has been put into trial production. The company has hired experts and professors from the above institutions to develop new products for many years. The company's thread rolling machine, reducing machine, twist anchor machine, twist cold (hot) flattening machine are all new patented products independently developed. In 2003, the company passed the ISO9001 international quality system certification. In 2004, "Bo Rong" thread rolling machine was awarded the title of high-quality product in Hebei Province.

The company's products win customers and market with the perfect combination of high-tech technology and modern craftsmanship and superior cost performance. Product sales cover 32 domestic provinces, municipalities and autonomous regions, with a domestic market share of 45% or more, and some products are exported to countries and regions such as Asia and Europe.

In order to promote the rapid development of Borong Machinery, the company plans to use five years to create the "Borong Machinery" brand into a well-known national brand. At the same time, it will establish Borong Group and form a group management by introducing new technologies and products. At present, the company is in the process of listing the "Borong Machinery" in the GEM market, and strives to meet the listing requirements within five years. After the company's listing and financing, the company's asset size can reach 500 million to 1 billion. In the future development process, Borong will continue to strengthen cooperation with colleagues from all walks of life to create a more brilliant tomorrow for the standard parts industry.

Company Info

  • Company Name: Boron Machinery Manufacturing CO. LTD
  • Representative: Zhang Xiao Qing
  • Product/Service: Thread Rolling Machine , CNC Steel Bar Bender , Concrete Transfer Pump , Numerical Control Lathe , Food Machinery , Woodworking Machinery
  • Capital (Million US $): 1000000RMB
  • Year Established: 2019
  • Total Annual Sales Volume (Million US $): US$2.5 Million - US$5 Million
  • Export Percentage: 71% - 80%
  • Total Annual Purchase Volume (Million US $): Below US$1 Million
  • No. of Production Lines: 5
  • No. of R&D Staff: 5 -10 People
  • No. of QC Staff: 5 -10 People
  • OEM Services Provided: yes
  • Factory Size (Sq.meters): 50,000-100,000 square meters
  • Factory Location: 河北省邢台市邢湾镇工业区
  • Contact Person: Mr. Zhu
  • Tel: 86--19933233332
Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters